pc header -->
Email:info@bidragon.com
Whatsapp:+8613373703313
English
FAQ


Language:
Solution
Your Position: Home > Solution

Boiler for Textile Industry

Bidragon industrial steam boilers, hot water boilers and thermal oil heaters are widely used in the chemical, medical, food, feed, textile, building materials, hotel, heating and other industries.

Textile industry boiler

Boiler for the textile industry

Textile refers to a multi-scale structural processing technique of a fiber or fiber assembly, it includes many steam consuming sections including dyeing, drying, slashing, printing, pressing etc.., all of which needs steam from boilers. With the increase in the demand for textiles, the steam consumption of textile factories is also increasing. Whether building a new textile factory or rebuilding and expanding a textile factory are faced with the problem of boiler selection.

Except for steam demanding, textile plants also need higher temperature heat source for printing, dyeing and hot-pressing sections, where thermal oil heaters will be used to heat the thermal oil to above 300°C high temperature, after the thermal oil are used for heat consuming machines, it will come back to boiler for circulating using. So, Steam Boiler and Thermal Oil Heater combination is commonly used in textile plants.

Related product recommendations

How to choose the right boiler for textile industry

1.Determine boiler capacity

The boiler capacity should based on the Heating Load Curve or Heat Balance Diagram, and includes the heat loss in pipelines, self-used heat of boiler room, available used waste heat. While, usually, it is difficult to get the Heating Load Curve, the heating load could get based on the max thermal consumption per hour within production/heating/domestic, and then determine by using the coefficient.

2.Determine Heating Medium

The demand of medium and the heating system should be determined according to the heating mode. Most textile mills use steam boilers. In recent year, according to different textile equipment, more and more heat conduction oil furnace also put into textile production.

3. Determin Heating Parameter

The heating parameters of boiler room should be in accordance with the requirements of users' heat parameters. But in the choice of boiler, should not make the boiler rated outlet pressure and temperature and user use pressure and temperature difference too large, so as not to cause high investment, low thermal efficiency.

4. Determine Boiler Efficiency

Boiler should be more efficient. The boiler output, the number of sets and other performance can adapt to the demand of heat load change, in order to facilitate economic management. If the use of one boiler operating at full load can meet the demand for steam, it is not appropriate to use two boilers operating under lower load. However, from the perspective of safety production, it is necessary to consider whether a single boiler in operation can be started quickly in a short time due to failure, so as to meet heating requirements without affecting production.

5. Capacity and Model

It is better to select the boilers with same capacity or combustion equipment. If different, the max limitation is two models, to decrease the problems of equipment layout and management.

Quick Quote Submission

If you have any questions about our company and products, please contact us immediately. Any inquiries and suggestions will be greatly appreciated.

Find your industry

+86 13373703313
info@bidragon.com

Get a free quote

We look forward to hearing from you and will respond within 24 hours!
X
[!--temp.visit--]