A boiler is a device that produces steam or hot water. It consists of a steel container for holding water and a combustion device. The hot water and steam it pr

It mainly depends on the calorific value of the gas and the thermal efficiency of the boiler.

steam boilers can use waste fabric as fuel. In fact, it is a sustainable and environmentally friendly way to generate heat and steam. Waste fabric is a biomass fuel, which means that it is made from organic materials that can be burned to produce heat. When waste fabric is burned in a boiler, it releases energy that can be used to heat water or generate steam.

A thermal oil boiler is a type of boiler that uses a heat transfer fluid, typically a thermal oil, to transfer heat to a process or application. Thermal oil boi

Industrial gas boilers use various gases as fuel. The user can choose the fuel according to the local actual situation. The pipeline gas source is stable and sa

The project is horizontal chain grate biomass steam boiler using at readymade garments. We learned that this customer is in the garment industry. Washing, drying, and ironing in garment manufacturing are all inseparable from steam

The water level gauge should correctly and clearly display the actual water level in the boiler; the water level gauge should be cleaned regularly according to the clarity of the glass plate of the water level gauge: when cleaning, first manually feed the water to make the boiler reach the highest water level;

Coal fired thermal oil boiler (heater) use coal as fuel, the thermal oil is heated in the tube. Using the circulating pimp to force the liquid thermal oil circulation , and then transporting the heat to the thermal equipment.

In order to further improve the heat utilization efficiency and reduce the energy consumption, This customer purchased a set of YLW series horizontal thermal oil heater from Bidragon Boiler

Thermal oil boiler  (also called Thermal oil heater) provides heat energy for the hot pressing and drying in the manufacturing processes of wood products. The end user of this project is a local wood product manufacturer in Bangladesh.

Leather can only be made into a leather product after many processes, among which neutralization, dyeing, fatliquoring, pressing and drying need high-temperature support. The customer ordered several sets of gas-fired thermal oil heaters from Bidragon Boiler for heating the production line.

One set 4000000kcal coal fired thermal oil heater arrived at customer’s site finally after the long distance shipping.
This chain grate type thermal oil heater will be separate into two parts during delivery, so that it will be convenient for transportation.
After customer received the heater, we’ll provide detailed drawing and free online guiding to help customer finish the assembling, installation and commissioning.

This customer has very high requirement for quality, and thanks to customer’s trust, they choose Bidragon among all the competitors at last.
Two sets 2500000kcal gas fired thermal oil heater installed successfully in customer’s workshop, cotton industry.
Expecting our long terms cooperation.

One set 1400KW gas fired thermal oil heater finished installation last week in Algeria, chemical factory.
Customer feedback with praise to Bidragon team. Thanks to our customer’s trust again.

What is the installation process of industrial boilers?

The condensing boiler condensing combustion technology reduces the flue gas temperature to 50 degrees, condenses part of the flue gas into a liquid state, and absorbs the flue gas.

Prevent the steam generator from entering too much steam: restart when the water heater valve is set, and the steam turbine unit side should allocate funds to lock the machinery and equipment, and fasten the check door of the exhaust pipe of the high-pressure cylinder to prevent the door from closing too loosely and causing the heat treatment furnace. Too much steam.

Each new gas fired boiler room can only be set up with one chimney. The height of the chimney should be based on the total installed capacity of the boiler room, as specified in Table 4, and the chimneys of oil-fired and gas-fired boilers should not be less than 8 meters.

The design of the boiler should be reasonable. The construction and connection of the furnace, combustion chamber, and pipelines need to be guided by professional boiler technicians

Many people think that the more fuel you add to a gas boiler, the more steam you can produce. However, if too much fuel enters the furnace, the effect will be counterproductive.

Thermal oil heater and steam boilers are two common types of boilers in industrial production. In the process of purchasing, how do companies measure which boiler is more energy-efficient? Let's find out together.

vertical steam boiler is a kind of boiler commonly used by small and medium-sized enterprises. This kind of boiler has relatively small evaporation capacity, small footprint, simple operation and safe operation.

(Gas fired /oil fired) thermal oil boilers use gas, fuel oil or ethanol as fuel, and heat-conducting oil as the heat-conducting carrier. They can be used as high-temperature heat sources in various environments below 350°C.

Refineries use Water tube boiler more than Fire tube boilers.
Reboilers (Kettle type boilers) are heat exchangers typically used to provide heat to the bottom o

A Boiler is a closed vessel in which water or other suitable liquid is heated to generate steam or vapour.The steam/vapour is then exited and is used for various purposes like heating applications (water heating, central heating), boiler based power generation or even for cooking and other purposes which could be domestic or industrial.